俄罗斯测试认证集团/海关联盟EAC认证中心

Центр сертификации EAC Таможенного союза ​ООО ТЕСТ СЕРТ 

上海经合工业设备检测有限公司    俄语区域产品认证专家

021-36411223      eac@cu-tr.org   WeChat:18621862553
润滑油EAC认证 润滑油CUTR认证 TR CU 030/2012(TP TC 030/2012) On safety of lubricants, oils, and special fluids
来源: | 作者:pmt1ac5e9 | 发布时间 :2018-11-22 | 1101 次浏览: | 分享到:
润滑油EAC认证 润滑油CUTR认证 TR CU 030/2012(TP TC 030/2012) On safety of lubricants, oils, and special fluids The technical regulation of the Customs Union TR CU 030/2012 On safety of lubricants, oils, and special fluids contains binding safety requirements for lubricants, oils and special fluids for the protection of life and health of humans and animals, environment, property. It also serves to avoid misleading actions against the consumer, as well as resource conservation

润滑油EAC认证 润滑油CUTR认证  TR CU 030/2012(TP TC 030/2012) On safety of lubricants, oils, and special fluids


The technical regulation of the Customs Union TR CU 030/2012 On safety of lubricants, oils, and special fluids contains binding safety requirements for lubricants, oils and special fluids for the protection of life and health of humans and animals, environment, property. It also serves to avoid misleading actions against the consumer, as well as resource conservation.

The TR CU 030/2012 technical regulation is intended to ensure the uniform application and enforcement of the requirements for new lubricants, oils and special fluids as well as their waste products and products made from lubricants, oils and special fluids. It also serves to ensure the free movement of goods.

Adopted on June 20, 2012
Entred into force on March 1, 2014

The lubricants, oils, and special fluids may only be put into circulation on the market of Russia and the EAEU if these meet the requirements of this and other technical regulations of the EAEU and the conformity assessment of the products has been confirmed.

The main risks associated with the marketing, use and processing of the products concerned are, as follows:

  • fire and explosion hazard

  • water content and the content of mechanical impurities in a concentration exceeding the standard values

  • ecological effects of waste products entering the environment

Every piece of lubricants, oils, special fluids in circulation must be accompanied by a special quality pass.

Application area of TR CU 030/2012

The technical regulation TR CU 030/2012 applies to lubricants, oils and special fluids.
Under the scope of application of TR CU 030/2012:

  • Lubricants, including:

    • Engine oils (universal, for carburettor or diesel engines, piston engines)

    • transmission oils

    • hydraulic oils

    • industrial oils

    • compressor oils

    • turbine oils

    • anti-corrosion oils

    • insulating

    • base oils

    • Lubricating oils of organic origin including:

    • fats

  • Special fluids:

    • cooling fluids (including coolant)

    • brake fluids

  • waste products

TR CU 030/2012 does not apply to:

  • products delivered under state defence

  • products exported from the customs territory of the EAEU

  • products located in the storage of organizations, which ensure the state material reserve

  • oils of vegetable or animal origin

  • products obtained by means of high-temperature distillation of coal tar (also creosotes)

  • according to Article 2 of TR 030/2012 do not fall under the names "oil", "lubricant" and "special liquid" products

The conformity assessment process

The conformity assessment with the requirements of the Technical Regulation TR CU 030/2012 On safety of lubricants, oils, and special fluids is carried out in the form of the EAC Declaration. The applicants are legal entities or individual entrepreneurs who are either manufacturers or importers (sellers). The tests for the conformity assessment process are carried out by the manufacturer himself, a test laboratory or a notified body, which is entered as such in a corresponding register for test laboratories.