俄罗斯测试认证集团/海关联盟EAC认证中心

Центр сертификации EAC Таможенного союза ​ООО ТЕСТ СЕРТ 

上海经合工业设备检测有限公司    俄语区域产品认证专家

021-36411223      eac@cu-tr.org   WeChat:18621862553
TP TC 010/2011(TR CU 010/2011) 关于机械设备的安全 海关联盟技术法规
来源: | 作者:pmt1ac5e9 | 发布时间 :2018-10-10 | 2036 次浏览: | 分享到:
TP TC 010/2011(TR CU 010/2011) 关于机械设备的安全 海关联盟技术法规 1、本技术法规是根据白俄罗斯共和国,哈萨克斯坦共和国和俄罗斯联邦11月18日“技术法规共同原则和规则协定”制定的。 2、本技术法规的制定是为了在海关联盟关税地区制定统一的强制性规定,以适用和执行机械和(或)开发(设计),制造,安装,调整,运行,储存,运输,销售和处置设备的要求确保在海关联盟单一关税区内流通的机器和(或)设备的自由流动。 3、如果海关联盟的其他技术规定,欧亚经济共同体(以下简称“欧亚经济区”)的EAEU技术规定将机械设备和(或)设备的要求适用于机器和(或)设备,机器和(或)设备必须符合要求海关联盟的这些技术规定,欧亚经济贸易仲裁委员会的作用也扩大到了这些

TP TC 010/2011(TR CU 010/2011) 关于机械设备的安全 海关联盟技术法规 

2016年5月16日修订版


海关联盟委员会决定批准
2011年10月18日第823号
   
关于机械设备的安全TR CU 010/2011海关联盟技术法规
(于2016年5月16日修订)
前言

1、本技术法规是根据白俄罗斯共和国,哈萨克斯坦共和国和俄罗斯联邦11月18日“技术法规共同原则和规则协定”制定的。
2、本技术法规的制定是为了在海关联盟关税地区制定统一的强制性规定,以适用和执行机械和(或)开发(设计),制造,安装,调整,运行,储存,运输,销售和处置设备的要求确保在海关联盟单一关税区内流通的机器和(或)设备的自由流动。
3、如果海关联盟的其他技术规定,欧亚经济共同体(以下简称“欧亚经济区”)的EAEU技术规定将机械设备和(或)设备的要求适用于机器和(或)设备,机器和(或)设备必须符合要求海关联盟的这些技术规定,欧亚经济贸易仲裁委员会的作用也扩大到了这些。

第1条、范围

1、本技术规定适用于海关联盟关税区内流通的机器和(或)设备。
2、本技术法规规定了开发(设计),制造,安装,调试,运行,储存,运输,处置和处置中机械和(或)设备的安全的最低要求,以保护人身,健康,财产,环境保护动物的生命和健康,防止误导消费者的行为。
3、本技术规定适用于根据附件1和2建立识别和识别的危害,消除或减少的要求的机器和(或)设备。
4、本技术规定不适用于以下类型的机器和(或)设备:
- 与确保通信网络运行的完整性和稳定性以及使用无线电频谱相关的机器和(或)设备;
- 用于医疗用途并用于与患者直接接触(X光,诊断,治疗,矫形,牙科,手术设备)的机器和(或)设备;
- 专门用于原子能使用领域的机器和(或)设备。对于在使用核能领域使用的机器和(或)一般工业设备,本技术法规的影响部分不符合确保核辐射安全的要求;
- 轮式车辆,除了安装在机器和(或)设备上;
- 海运和运输车辆(船舶和浮动设施,包括其上使用的机械和(或)设备);
- 飞行和太空车辆;
- 铁路运输和地下专用铁路机车车辆和技术装备;
- 景区游乐设备;
- 军备装备;
- 供残疾人使用的机器和(或)设备;
- 农业和林业拖拉机和拖车,除了机器和(或)设备上安装的设备;
- 钻井平台,除了在机器和(或)设备上使用。
5、本技术法规的有效性适用于机器和(或)设备,包括在危险生产设施中使用的设备。
(经2016年5月16日欧洲经委会理事会决定修改的段落,2016年12月2日第37期。
6、如果设备造成的风险在海关联盟其他技术规定中完全或部分确定,则EAEU欧亚联盟机器和(或)设备必须符合海关联盟EAEU欧亚联盟技术规定的要求,EAEU的效力适用于本法规。
7、在识别机器和(或)设备时,确定了特定机器和/或设备对样品或其说明的一致性,可用作本技术规则第6条第1款规定的标准,分类器,规格和图纸,技术条件,操作文件。
8、按照附录2安装某些类别的机械和设备的附加安全要求。

All industrial enterprises keep exactly on the equipment - just with the help of it factories and factories produce their products. Therefore, a failure in the operation of machines can undermine the entire technological process. Therefore, a regulation was issued on the safe operation of industrial equipment.

TR CU 010/2011 "On the safety of machinery and equipment"
Cars and a variety of equipment overwhelm our society, in their absence, modern people are unlikely to be able to adapt. For example, threshers, conveyors, chemical equipment or those used in manufacturing. Equipment - a large number, but also a large number and threats, dangers to life, which can bring a person. To provide security and conformity assessment laws, we developed the Technical Regulations of the Customs Union 010/2011 “On the safety of machinery and equipment”.

In this article we will discuss with you the machines and equipment used at the hazardous production facility.
The technical regulations apply to machines and equipment that are manufactured or imported into the territory of the Customs Union.
Let us examine what types of machinery and equipment are not included in the document in question:
• vehicles and equipment related to ensuring the integrity and stability of communication networks and the use of the radio frequency spectrum;
• various amusement rides;
• defense technology, military;
• flying or space equipment;
• motor vehicles (wheeled vehicles), but without equipment installed on them;
• waterborne vehicles;
• various equipment used in railway transport;
• drilling platforms;
• also, tractors, trailers and other agricultural machines and much more.
• All-terrain vehicles, snow and swamp vehicles, all-terrain vehicles;

All other equipment published in circulation on the territory of the Customs Union is subject to conformity assessment to the conditions of the considered regulations. Conformity assessment takes place in the form of proof of compliance and also in the form of state control.