汽车配件EAC认证-俄罗斯汽车零部件 EAC认证-Russian Auto Parts EAC certification

Legislative changes will once again affect the safety of wheeled vehicles in Russia.

The system of certification of auto parts in accordance with the existing legal framework is guided by the Technical Regulations of the CU, within the framework of Decision No. 877 of the Customs Union Commission (revised January 30, 2013), where the list of vehicle components to be assessed, confirming compliance with the CU TR 018/2011 is determined.

However, as it became known from the publication in official sources, approved by Decision No. 6 of the EAEU Council (March 30, 2013) with new changes, the Technical Regulations will enter into force in the area of territorial coverage of the Customs Union from the first day of January 2015.

Certification of auto parts is a complex of certain procedures in accordance with existing norms, requirements, rules established by law. The purpose of this procedure is to determine their level of safety. This is part of the process of mandatory state control over the quality of the goods manufactured and put into circulation in Russia.

Most of the auto parts falls under the current Technical Regulations, which determine the degree of safety of wheeled vehicles. This entails the design of a special document, which means the conformity of the TR product under registration number 018/2011.

Vehicles are a dangerous source for others. Often, accidents, accidents on the roads occur due to the fact that auto parts of cars are made poorly, did not transfer the necessary loads during the operation period. In order to prevent, to avoid such cases, careful inspection is necessary, the implementation of special measures.

Certification procedure for auto parts is also subject to the establishment of technical regulations and consists of several stages:

• A corresponding application is submitted to the certification authority (center).

• The required package of documents is being collected.

• A sample of the product is provided for the necessary checks and examinations.

• Special laboratories with appropriate accreditation are tested

• The results of inspections are made in writing.

• A decision is made on the conformity of the product, issuing a TP certificate.

• The executed document in a single database is registered, issued to the applicant.

Some time ago, the procedure for obtaining permits documentation of spare parts was mandatory for obtaining. It was carried out by the GOST R system with design in yellow color. However, when the Government's Decree of 2010 was put into effect, a mandatory check came into force in accordance with the Technical Regulations. This type of permits is still carried out in accordance with GOST R, but the structure of the sertifikata itself has undergone some changes.

Parts for certification are classified as follows:

• Electrical equipment (instrument lamps, headlights, spark plugs).

• Parts of the body (door, glass, luggage compartment, hood).

• Transmission devices.

• Spare parts for gas distribution system.

• Engine and cooling system.

• Fuel supply (pump, gas tank).

• Braking.

A certificate is considered mandatory for auto parts, which are classified as the most dangerous devices. A detailed list of them can be found in PP number 982.

Registration of auto parts of the necessary documentation for auto parts is carried out only with the presence of a prepared protocol of the product sample, which has passed the required tests. Therefore, in order to contact the laboratory, it is necessary to provide a sufficient number of samples so that the examination can be carried out quickly and efficiently.

Mandatory certification of auto parts can be carried out using a standard scheme, which evaluates the serial production range of products, as well as for each individual batch. If the authorization document belongs to the manufacturer, then according to this document it is allowed to transport any number of spare parts until it expires. In other cases, moving abroad limits the number of auto parts on the document.

In addition to the mandatory registration of permits for auto parts, there is also a system - a voluntary system for registration of auto parts. This procedure is issued, it can be either for parts that require mandatory compliance (specified in PP number 720), and other types of such products. To obtain voluntary registration, you should contact the appropriate issuing authority. When contacting our center, a certificate for auto parts is issued and issued in accordance with the requirements of the Russian standard.