TP TC 032/2013 (TR CU 032/2013) 关于承压的设备安全 海关联盟技术法规 一、适用范围 1、本技术规定为开发（设计）制造的承压设备规定了安全要求，以保护人身和健康，财产，防止误导消费者的行为。 2、本技术规定涵盖以下类型的设备： a）用于在压力环境下介质是气体、液化气体和蒸气的容器以及用于第1组工作环境并具有： 最大允许工作压力高于0.05MPa，容量大于0.001m³，最大允许工作压力的容积值超过0.0025MPa•m3 最大允许工作压力20 MPa，容量大于0.0001 m3至0.001 m3。 第1组工作环境下，介质用气体的容器类别列于本技术规定附录1的表1中 （b）用于气体介质容器，液化气体溶液，用于第2组工作环境的蒸汽： 最大允许工作压力在0.05MPa以上，容量超过0.001m3，最大允许工作压力的乘积值超过0,005MPa·m3 最大允许工作压力超过100MPa，容量大于0.0001 m3至0.001 m3。 第2组工作介质用气体容器的类别见本技术规范附录1的表2 c）用于第1组工作介质中液体的容器，具有： 最大允许工作压力在0.05MPa以上，容量超过0.001 m3，最大允许工作压力的容积值为0.02MPa·m3 第1类液体和工作介质用容器类别列在本技术规定附录1的表3中 d）用于液体容器，用于第2组的工作介质，并具有： 最大允许工作压力MPa•m3 最大允许工作压力大于100MPa，容量大于0.0001 m3至0.01 m3。 第2类用于液体工作介质的容器类别见本技术规范附录1的表4 e）容量为0.002 m3的锅炉，用于生产温度高于110℃或蒸汽压力高于0.05MPa的热水，以及容量大于0.002 m3的直接燃烧容器。 蒸汽和热水锅炉及直接燃烧容器的类别见本技术规定附录1的表5 f）管道，其最高允许工作压力在0.05 MPa以上，公称直径大于25mm，用于气体和蒸汽，用于第1组的工作介质中。 用于气体和蒸汽的管道类别，用于第1组的工作介质，见本技术法规附录1表6。 g）管道的最高允许工作压力超过0.05 MPa，公称直径大于32 mm毫米，公称直径大于100 MPa的最大允许工作压力的乘积，用于气体和蒸汽，用于组内工作介质。 适用于气体和蒸汽的管道类别，用于第2组的工作介质，见本技术法规附件1表7。 h）最大允许工作压力高于0.05MPa，公称直径为25mm，最大允许工作压力为200MPa·mm的管道设计用于液体并用于第1组工作介质中。 第1组液体和工作介质设计的管道类别见本技术规范附录1的表8 i）管道的最大允许压力为500 MPa•mm，专为液体设计，用于组工作介质2。 本规范附件1表9列出了第2类液体和工作介质设计的管道类别 j）耐压项目的设备（组装单元）及其组件 k）公称直径为25 mm的阀门（用于第1组工作介质的设备），公称直径为32 mm的阀门（用于组2的气体介质的设备），公称直径为200 mm的阀门（用于液体，用于第2组的工作介质。 最大允许工作压力超过50MPa，容量大于0.0001 m3至0.001 m3【详细】

俄罗斯认证-俄罗斯计量和标准化-Russina Metrology standardization and certification-Метрология стандартизация и сертификация Metrology, standardization and certification, by their significance, are a certain component of complex measures aimed primarily at ensuring the established quality characteristics of goods produced in the country and put into operation. In this aspect, a special legal framework is applicable, standards, focusing on which is determined by an objective assessment of the quality of a product. In order to simplify tasks in matters of supervisory functions over the quality of facilities, a system of standards uniform for use has been developed and implemented, which detail the positions required to ensure proper quality properties of facilities. In metrology, standardization and certification, as in science, there is a division into three basic components. By virtue of this, standardization covers the area of establishing fixed rules, as well as the intrinsic characteristics of products. Metrology as a science is recognized as a controlling mechanism over measurements. In turn, certification confirms the validity of compliance of the goods released into circulation with all the characteristic norms of standards and technical regulations.【详细】

床上用品服装羽绒服皮靴休闲鞋运动鞋EAC认证-纺织品CUTR认证-Russina CUTR Certification of light industry goods 床上用品EAC认证，服装EAC认证，羽绒服EAC认证，皮靴EAC认证，休闲鞋EAC认证，运动鞋EAC认证，纺织品EAC认证，法规 TP TC 017/2011 轻工产品安全性技术法规。In Russia, the light industry sector is recognized as one of the most significant in the issue of primary processing of raw materials and the release of finished textile, cotton, linen, silk, etc. to the global commodity market. products. In the economic aspect, light industry is considered to be easily repaid, since the products manufactured directly for people (clothing, footwear) are in active demand, constitute the majority of the goods produced in the country.【详细】

俄罗斯医疗器械分类和欧盟医疗器械分类几乎完全一致，一般可以参照欧盟的分类进行。Medical Device (MDD)（医疗器械指令） 93/42/EEC 1.1.1995～15.6.1998/4/3 In Vitro Diagnostic Device (IVDD) （体外诊断医疗器械指令） 98/79/EC 7.6.2000～12.7.2003 考虑医疗器械之设计及制造对人体可能带来的危险程度，【详细】

俄罗斯葡萄酒EAC认证，Voluntary grape wine certification，The presence of a large amount of low-quality alcohol, including grape wines, on the domestic market, which causes great harm to citizens, is still an urgent problem in our country.【详细】

EAC认证机构-俄罗斯莫斯科认证中心-Certification in Moscow-莫斯科产品GOST认证 Certification is an event whose main objectives are to confirm the assessment of compliance with quality standards and create conditions conducive to the successful functioning of organizations and their participation in various spheres of economic and economic activity. The support of enterprises is especially important in large cities with high competition, in particular, certification in Moscow has an important beneficial effect on the state of the markets and the quality of products consumed by the population. Due to obtaining a certificate in Moscow, citizens are better protected from unscrupulous manufacturers. In addition, through the certification measures in Moscow is carried out stabilization of the environment.【详细】

俄罗斯认证，俄罗斯GOST认证，Russia Certification.Russia Certificate of conformity，First of all, certification is permissive documents established at the state level of a single form. In the Russian certification system, due to its wide application in practice, today it has acquired particular relevance.【详细】

俄罗斯认证-GOST认证-俄罗斯认证制度解读-GOST Certification system in Russia The Russian certification system today is the regulation of the quality of objects in circulation, of imported, exported products, designed to ensure safety in the broadest sense of life and the protection of public health. The global domestic quality assurance mechanism is being systematically improved as part of harmonization with international standards. Along with the rapid development of socio-economic inter-ethnic market relations, it is of particular relevance.【详细】